KSP, KSP-A / MKSP, MKSP-A Series
Single Row, Self-Aligning
Aircraft Control Bearing
- Self-aligning single row ball bearing
- Manufactured to AS27645 per AS7949
- All external surfaces except bore and stainless steel seal retainers are cadmium plated
- Installed with PTFE seals
- Pre-lubricated (see grease specifications)
- Warning: Do not allow these bearings to act as misalignment stops!
(Click on Bearing Part Number to get 2D/3D CAD files from VirtualCAD) | |
---|---|
Bearing Part Number |
|
MS 27645- |
|
Bore
d |
|
Outside Diameter D (in.) |
|
Inner Ring Width B (in.) |
|
Outer Ring Width C (in.) |
|
Inner Land Diameter d1 |
|
Inner Ring Chamfer c1 |
|
Outer Ring Chamfer c |
|
Radial Limit Load Rating | |
Thrust Limit Load Rating | |
+.0000 -.0010 |
|
+.0000 -.0003 |
|
+.0000 -.0010 |
|
+.0000 -.0004 |
|
+.000 -.005 |
|
+.0000 -.0025 |
|
+.000 -.005 |
|
+.000 -.005 |
|
Approx. | |
+.015 -.000 |
|
+.015 -.000 |
|
(lbs.) † | |
(lbs.) † | |
KSP3L | |
-3A | |
0.1900 | |
0.6250 | |
0.245 | |
0.203 | |
0.256 | |
0.005 | |
0.016 | |
550 | |
100 | |
KSP4A | |
-4A | |
0.2500 | |
0.7500 | |
0.281 | |
0.219* | |
0.328 | |
0.005 | |
0.016 | |
900 | |
200 | |
KSP5A | |
-5A | |
0.3125 | |
0.8125 | |
0.297 | |
0.234 | |
0.389 | |
0.015 | |
0.016 | |
1000 | |
200 | |
KSP6A | |
-6A | |
0.3750 | |
0.8750 | |
0.313 | |
0.250 | |
0.462 | |
0.016 | |
0.016 | |
1120 | |
200 | |
KSP3 | |
-3 | |
0.1900 | |
0.7774 | |
0.297 | |
0.270 | |
0.297 | |
0.005 | |
0.022 | |
900 | |
200 | |
KSP4 | |
-4 | |
0.2500 | |
0.9014 | |
0.484 | |
0.335 | |
0.396 | |
0.005 | |
0.032 | |
1410 | |
300 | |
KSP5 | |
-5 | |
0.3125 | |
1.2500 | |
0.558 | |
0.375 | |
0.567 | |
0.015 | |
0.032 | |
2190 | |
300 | |
KSP6 | |
-6 | |
0.3750 | |
1.4375 | |
0.620 | |
0.469 | |
0.612 | |
0.015 | |
0.032 | |
2980 | |
400 | |
KSP8 | |
-8 | |
0.5000 | |
1.6875 | |
0.620 | |
0.500 | |
0.796 | |
0.015 | |
0.044 | |
3670 | |
500 | |
KSP10 | |
-10 | |
0.6250 | |
1.9375 | |
0.813 | |
0.625 | |
0.922 | |
0.015 | |
0.044 | |
5320 | |
600 |
(Click on Bearing Part Number to get 2D/3D CAD files from VirtualCAD) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Part Number |
MS 27645- |
Bore
d |
Outside Diameter D (in.) |
Inner Ring Width B (in.) |
Outer Ring Width C (in.) |
Inner Land Diameter d1 |
Inner Ring Chamfer c1 |
Outer Ring Chamfer c |
Radial Limit Load Rating | Thrust Limit Load Rating | ||||
+.0000 -.0010 |
+.0000 -.0003 |
+.0000 -.0010 |
+.0000 -.0004 |
+.000 -.005 |
+.0000 -.0025 |
+.000 -.005 |
+.000 -.005 |
Approx. | +.015 -.000 |
+.015 -.000 |
(lbs.) † | (lbs.) † | ||
KSP3L | -3A | 0.1900 | 0.6250 | 0.245 | 0.203 | 0.256 | 0.005 | 0.016 | 550 | 100 | ||||
KSP4A | -4A | 0.2500 | 0.7500 | 0.281 | 0.219* | 0.328 | 0.005 | 0.016 | 900 | 200 | ||||
KSP5A | -5A | 0.3125 | 0.8125 | 0.297 | 0.234 | 0.389 | 0.015 | 0.016 | 1000 | 200 | ||||
KSP6A | -6A | 0.3750 | 0.8750 | 0.313 | 0.250 | 0.462 | 0.016 | 0.016 | 1120 | 200 | ||||
KSP3 | -3 | 0.1900 | 0.7774 | 0.297 | 0.270 | 0.297 | 0.005 | 0.022 | 900 | 200 | ||||
KSP4 | -4 | 0.2500 | 0.9014 | 0.484 | 0.335 | 0.396 | 0.005 | 0.032 | 1410 | 300 | ||||
KSP5 | -5 | 0.3125 | 1.2500 | 0.558 | 0.375 | 0.567 | 0.015 | 0.032 | 2190 | 300 | ||||
KSP6 | -6 | 0.3750 | 1.4375 | 0.620 | 0.469 | 0.612 | 0.015 | 0.032 | 2980 | 400 | ||||
KSP8 | -8 | 0.5000 | 1.6875 | 0.620 | 0.500 | 0.796 | 0.015 | 0.044 | 3670 | 500 | ||||
KSP10 | -10 | 0.6250 | 1.9375 | 0.813 | 0.625 | 0.922 | 0.015 | 0.044 | 5320 | 600 |
* .244 ref. over seal.
Notes:
- Bearings are self-aligning for 10 degrees in either direction except for KSP4A, KSP5A, and KSP6A which are self-aligning for 8 degrees in either direction.
- Check with Schatz Bearing Corporation for current approval status.
- Contact Schatz Bearing Corporation’s Engineering Department for further technical information.
- Check with Schatz Bearing Corporation’s Sales Department for price and availability.