Flexible. Versatile. responsive.

1200 Series

precision_cg

Light Precision Ball Bearings

  • Light Duty
  • Single row radial ball bearing
  • Deep groove ball bearing
  • Non-filling slot bearings
  • Metric precision ball bearing

Tolerances shown below are ABEC 1. Also available inABEC 3, ABEC 5, and ABEC 7.

wdt_ID Part Number Bore d<br>(in.) Bore Tolerance (in.)<br>+.0000 to Minus: Outside Diameter<br>D (in.) Outside Diameter Tolerance<br>(in.)<br>+.0000 to Minus: Width C (in.)<br>+.000 to -.005 Corner Radius<br>R* (in.) With Snap Ring<br>Snap Ring O.D. (S)<br>(in.) With Snap Ring<br>Snap Ring Width (T)<br>(in.) With Snap Ring<br>Groove Location (L)<br>(in.) Balls – Number Balls – Size<br>(in.) Basic Dynamic Radial Load Rating Cr (lbs) †
1 1200 0.3937 0.0003 1.1811 0.0004 0.3543 0.025 1.359 0.042 0.120 7 7/32 1,330
2 1201 0.4724 0.0003 1.2598 0.0005 0.3937 0.025 1.438 0.042 0.120 7 15/64 1,520
3 1202 0.5906 0.0003 1.378 0.0005 0.4331 0.025 1.547 0.042 0.120 8 7/32 1,510
4 1203 0.6693 0.0003 1.5748 0.0005 0.4724 0.025 1.750 0.042 0.120 8 17/64 2,130
5 1204 0.7874 0.0004 1.8504 0.0005 0.5512 0.040 2.062 0.042 0.136 8 5/16 2,850
6 1205 0.9843 0.0004 2.0472 0.0005 0.5906 0.040 2.266 0.042 0.136 9 5/16 3,130
7 1206 1.1811 0.0004 2.4409 0.0005 0.6299 0.040 2.656 0.065 0.190 9 13/32 4,980
8 1207 1.3780 0.0005 2.8346 0.0005 0.6693 0.040 3.078 0.065 0.190 9 15/32 5,820
9 1208 1.5748 0.0005 3.1496 0.0005 0.7087 0.040 3.406 0.065 0.190 9 1/2 7,280
10 1209 1.7717 0.0005 3.3465 0.0006 0.7480 0.040 3.594 0.065 0.190 10 1/2 7,830
11 1210 1.9685 0.0005 3.5433 0.0006 0.7874 0.040 3.797 0.095 0.220 10 1/2 7,830
12 1211 2.1654 0.0006 3.9370 0.0006 0.8268 0.060 4.188 0.095 0.220 10 9/16 9,680
13 1212 2.3622 0.0006 4.3307 0.0006 0.8661 0.060 4.578 0.095 0.220 10 9/16 9,680
14 1213 2.5591 0.0006 4.7244 0.0006 0.9055 0.060 5.094 0.109 0.265 10 21/32 12,770
15 1214 2.7559 0.0006 4.9213 0.0008 0.9449 0.060 5.297 0.109 0.265 10 11/16 13,890
16 1215 2.9528 0.0006 5.1181 0.0008 0.9843 0.060 5.500 0.109 0.265 11 11/16 14,770
Part Number Bore d<br>(in.) Bore Tolerance (in.)<br>+.0000 to Minus: Outside Diameter<br>D (in.) Outside Diameter Tolerance<br>(in.)<br>+.0000 to Minus: Width C (in.)<br>+.000 to -.005 Corner Radius<br>R* (in.) With Snap Ring<br>Snap Ring O.D. (S)<br>(in.) With Snap Ring<br>Snap Ring Width (T)<br>(in.) With Snap Ring<br>Groove Location (L)<br>(in.) Balls – Number Balls – Size<br>(in.) Basic Dynamic Radial Load Rating Cr (lbs) †

 

† Refer to the Technical Info section for Bearing Life Calculations.

* Maximum shaft or housing fillet which bearing corner will clear.

Notes:

  1. Available with shields or seals.
  2. Contact Schatz Bearing Corporation’s Engineering Department for further technical information.
  3. Check with Schatz Bearing Corporation’s Sales Department for price and availability.


bearing_options_materials3