Flexible. Versatile. responsive.

1300 Series

precision_cg

Medium Precision Ball Bearings

  • Medium Duty
  • Single row radial ball bearing
  • Deep groove ball bearing
  • Non-filling slot bearings
  • Metric precision ball bearing

Tolerances shown below are ABEC 1. Also available inABEC 3, ABEC 5, and ABEC 7.


wdt_ID Part Number Bore d<br>(in.) Bore Tolerance (in.)<br>+.0000 to Minus: Outside Diameter<br>D (in.) Outside Diameter Tolerance (in.)<br>+.0000 to Minus: Width C (in.)<br>+.000 to -.005 Corner Radius<br>R* (in.) With Snap Ring<br>Snap Ring O.D. (S)<br>(in.) With Snap Ring<br>Snap Ring Width (T)<br>(in.) With Snap Ring<br>Groove Location (L)<br>(in.) Balls – Number Balls – Size<br>(in.) Basic Dynamic Radial Load Rating Cr (lbs) †
1 1300 0.3937 0.0003 1.3780 0.0005 0.4331 0.025 1.547 0.042 0.120 6 9/32 1,920
2 1301 0.4724 0.0003 1.4567 0.0005 0.4724 0.040 1.609 0.042 0.120 6 5/16 2,170
3 1302 0.5906 0.0003 1.6535 0.0005 0.5118 0.040 1.812 0.042 0.120 6 11/32 2,620
4 1303 0.6693 0.0003 1.8504 0.0005 0.5512 0.040 2.062 0.042 0.136 6 3/8 3,100
5 1304 0.7874 0.0004 2.0472 0.0005 0.5906 0.040 2.266 0.042 0.136 7 13/32 4,020
6 1305 0.9843 0.0004 2.4409 0.0005 0.6693 0.040 2.656 0.065 0.190 7 15/32 5,270
7 1306 1.1811 0.0004 2.8346 0.0005 0.7480 0.040 3.078 0.065 0.190 8 1/2 6,600
8 1307 1.3780 0.0005 3.1496 0.0005 0.8268 0.060 3.406 0.065 0.190 8 9/16 8,160
9 1308 1.5748 0.0005 3.5433 0.0006 0.9055 0.060 3.797 0.095 0.220 8 5/8 9,890
10 1309 1.7717 0.0005 3.9370 0.0006 0.9843 0.060 4.188 0.095 0.220 8 11/16 11,770
11 1310 1.9685 0.0005 4.3307 0.0006 1.0630 0.080 4.578 0.095 0.220 8 11/16 11,770
12 1311 2.1654 0.0006 4.7244 0.0006 1.1417 0.080 5.094 0.109 0.265 8 13/16 15,950
13 1312 2.3622 0.0006 5.1181 0.0008 1.2205 0.080 5.500 0.109 0.265 8 7/8 18,240
14 1313 2.5591 0.0006 5.5118 0.0008 1.2992 0.080 5.891 0.109 0.297 8 15/16 20,670
17 1314 2.7559 0.0006 5.9055 0.0008 1.3780 0.080 6.281 0.109 0.297 8 1 23,240
Part Number Bore d<br>(in.) Bore Tolerance (in.)<br>+.0000 to Minus: Outside Diameter<br>D (in.) Outside Diameter Tolerance (in.)<br>+.0000 to Minus: Width C (in.)<br>+.000 to -.005 Corner Radius<br>R* (in.) With Snap Ring<br>Snap Ring O.D. (S)<br>(in.) With Snap Ring<br>Snap Ring Width (T)<br>(in.) With Snap Ring<br>Groove Location (L)<br>(in.) Balls – Number Balls – Size<br>(in.) Basic Dynamic Radial Load Rating Cr (lbs) †

† Refer to the Technical Info section for Bearing Life Calculations.

* Maximum shaft or housing fillet which bearing corner will clear.

Notes:

  1. Available with shields or seals.
  2. Contact Schatz Bearing Corporation’s Engineering Department for further technical information.
  3. Check with Schatz Bearing Corporation’s Sales Department for price and availability.


bearing_options_materials3