7100H Series

7100H series bearings are single row, deep groove, radial ball bearings with ABEC 1, 3, 5, and 7 tolerances. They are angular contact bearings designed for extra light duty.

7100H Series Bearings

Extra light duty, angular contact ball bearing
Manufactured to ABEC 1, 3, 5 and 7 tolerances per ABMA Standard 20, typically from SAE 52100 steel. Other material options are available.
Standard contact angle is 30°. Other contact angle options are available.
Part numbers listed are an outer ring relieved configuration. Other design options are available.
Corner radius (r) is the maximum shaft or housing radius that bearing corners will clear.

Bearing Measurement Reference

wdt_ID	Part Number	Bore d<br>(mm.)	Bore d<br>(in.)	Outside<br>Diameter<br>D (mm)	Outside<br>Diameter<br>D (in.)	Width C<br>(mm)	Width C<br>(in.)	Corner<br>Radius<br>R* (mm)	Corner<br>Radius<br>R* (in.)	Basic<br>Dynamic<br>Radial<br>Load<br>Rating<br>Cr (lbs) †	Basic<br>Static<br>Radial<br>Load<br>Rating<br>Cor (lbs) †
1	7100H	10	0.3937	26	1.0236	8	0.3150	0.3	0.012	836	360
2	7101H	12	0.4724	28	1.1024	8	0.3150	0.3	0.012	911	425
3	7102H	15	0.5906	32	1.2598	9	0.3543	0.3	0.012	1,042	553
4	7103H	17	0.6693	35	1.3780	10	0.3937	0.3	0.012	1,028	563
5	7104H	20	0.7874	42	1.6535	12	0.4724	0.6	0.025	1,633	883
6	7105H	25	0.9843	47	1.8504	12	0.4724	0.6	0.025	2,044	1313
7	7106H	30	1.1811	55	2.1654	13	0.5118	1.0	0.040	2,635	1808
8	7107H	35	1.3780	62	2.4409	14	0.5512	1.0	0.040	3,318	2401
9	7108H	40	1.5748	68	2.6772	15	0.5906	1.0	0.040	4,455	3181
10	7109H	45	1.7717	75	2.9528	16	0.6299	1.0	0.040	4,019	3162
11	7110H	50	1.9685	80	3.1496	16	0.6299	1.0	0.040	4,707	3758
12	7111H	55	2.1654	90	3.5433	18	0.7087	1.0	0.040	5,628	4712
13	7112H	60	2.3622	95	3.7402	18	0.7087	1.0	0.040	5,386	4173
14	7113H	65	2.5591	100	3.9370	18	0.7087	1.0	0.040	5,521	4533
15	7114H	70	2.7559	110	4.3307	20	0.7874	1.0	0.040	6,683	5498
16	7115H	75	2.9528	115	4.5276	20	0.7874	1.0	0.040	7,022	5921
17	7116H	80	3.1496	125	4.9213	22	0.8661	1.0	0.040	7,831	6684
18	7117H	85	3.3465	130	5.1181	22	0.8661	1.0	0.040	8,680	7494
19	7118H	90	3.5433	140	5.5118	24	0.9449	1.5	0.060	9,987	8591
20	7119H	95	3.7402	145	5.7087	24	0.9449	1.5	0.060	10,492	9252
21	7120H	100	3.9370	150	5.9055	24	0.9449	1.5	0.060	11,456	10200
	Part Number	Bore d<br>(mm.)	Bore d<br>(in.)	Outside<br>Diameter<br>D (mm)	Outside<br>Diameter<br>D (in.)	Width C<br>(mm)	Width C<br>(in.)	Corner<br>Radius<br>R* (mm)	Corner<br>Radius<br>R* (in.)	Basic<br>Dynamic<br>Radial<br>Load<br>Rating<br>Cr (lbs) †	Basic<br>Static<br>Radial<br>Load<br>Rating<br>Cor (lbs) †

† Refer to the Technical Info section for Bearing Life Calculations.

* Maximum shaft or housing fillet which bearing corner will clear.

Notes:

Available with shields or seals.
Contact Schatz Bearing Corporation’s Engineering Department for further technical information.
Check with Schatz Bearing Corporation’s Sales Department for price and availability.