7200H Series

7200H series bearings are single row, deep groove, radial ball bearings with ABEC 1, 3, 5, and 7 tolerances. They are angular contact bearings designed for light duty.

7200H Series Bearings

Light duty, angular contact ball bearing
Manufactured to ABEC 1, 3, 5 and 7 tolerances per ABMA Standard 20, typically from SAE 52100 steel. Other material options are available.
Standard contact angle is 40°. Other contact angle options are available.
Part numbers listed are an outer ring relieved configuration. Other design options are available.
Corner radius (r) is the maximum shaft or housing radius that bearing corners will clear.

Bearing Measurement Reference

wdt_ID	Part Number	Bore d<br>(mm.)	Bore d<br>(in.)	Outside<br>Diameter<br>D (mm)	Outside<br>Diameter<br>D (in.)	Width C<br>(mm)	Width C<br>(in.)	Corner<br>Radius<br>R* (mm)	Corner<br>Radius<br>R* (in.)	Basic<br>Dynamic<br>Radial<br>Load<br>Rating<br>Cr (lbs) †	Basic<br>Static<br>Radial<br>Load<br>Rating<br>Cor (lbs) †
1	7200H	10	0.3937	30	1.1811	9	0.3543	0.6	0.025	1,103	483
2	7201H	12	0.4724	32	1.2598	10	0.3937	0.6	0.025	1,249	558
3	7202H	15	0.5906	35	1.3780	11	0.4331	0.6	0.025	1,401	646
4	7203H	17	0.6693	40	1.5748	12	0.4724	0.6	0.025	1,704	854
5	7204H	20	0.7874	47	1.8504	14	0.5512	1.0	0.040	2,649	1477
6	7205H	25	0.9843	52	2.0472	15	0.5906	1.0	0.040	2,442	1377
7	7206H	30	1.1811	62	2.4409	16	0.6299	1.0	0.040	3,947	2275
8	7207H	35	1.3780	72	2.8346	17	0.6693	1.0	0.040	5,475	3375
9	7208H	40	1.5748	80	3.1496	18	0.7087	1.0	0.040	6,528	4288
10	7209H	45	1.7717	85	3.3465	19	0.7480	1.0	0.040	6,064	3957
11	7210H	50	1.9685	90	3.5433	20	0.7874	1.0	0.040	7,510	5617
12	7211H	55	2.1654	100	3.9370	21	0.8268	1.5	0.060	7,436	5059
13	7212H	60	2.3622	110	4.3307	22	0.8661	1.5	0.060	7,331	5166
14	7213H	65	2.5591	120	4.7244	23	0.9055	1.5	0.060	9,780	6923
15	7214H	70	2.7559	125	4.9213	24	0.9449	1.5	0.060	10,625	7609
16	7215H	75	2.9528	130	5.1181	25	0.9843	1.5	0.060	11,237	8468
17	7216H	80	3.1496	140	5.5118	26	1.0236	2.0	0.080	12,363	9128
18	7217H	85	3.3465	150	5.9055	28	1.1024	2.0	0.080	14,124	10953
19	7218H	90	3.5433	160	6.2992	30	1.1811	2.0	0.080	16,262	12737
20	7219H	95	3.7402	170	6.6929	32	1.2598	2.0	0.080	18,530	14649
21	7220H	100	3.9370	180	7.0866	34	1.3386	2.0	0.080	20,930	16693
	Part Number	Bore d<br>(mm.)	Bore d<br>(in.)	Outside<br>Diameter<br>D (mm)	Outside<br>Diameter<br>D (in.)	Width C<br>(mm)	Width C<br>(in.)	Corner<br>Radius<br>R* (mm)	Corner<br>Radius<br>R* (in.)	Basic<br>Dynamic<br>Radial<br>Load<br>Rating<br>Cr (lbs) †	Basic<br>Static<br>Radial<br>Load<br>Rating<br>Cor (lbs) †

† Refer to the Technical Info section for Bearing Life Calculations.

* Maximum shaft or housing fillet which bearing corner will clear.

Notes:

Available with shields or seals.
Contact Schatz Bearing Corporation’s Engineering Department for further technical information.
Check with Schatz Bearing Corporation’s Sales Department for price and availability.