7200 Series

7200 series bearings are single row, deep groove, radial ball bearings with ABEC 1, 3, 5, and 7 tolerances. They are angular contact bearings designed for light duty.

7200 Series Bearings

Light duty, angular contact ball bearing
Manufactured to ABEC 1, 3, 5 and 7 tolerances per ABMA Standard 20, typically from SAE 52100 steel. Other material options are available.
Standard contact angle is 30°. Other contact angle options are available.
Part numbers listed are an outer ring relieved configuration. Other design options are available.
Corner radius (r) is the maximum shaft or housing radius that bearing corners will clear.

Bearing Measurement Reference

wdt_ID	Part Number	Bore d<br>(mm.)	Bore d<br>(in.)	Outside<br>Diameter<br>D (mm)	Outside<br>Diameter<br>D (in.)	Width C<br>(mm)	Width C<br>(in.)	Corner<br>Radius<br>R* (mm)	Corner<br>Radius<br>R* (in.)	Basic<br>Dynamic<br>Radial<br>Load<br>Rating<br>Cr (lbs) †	Basic<br>Static<br>Radial<br>Load<br>Rating<br>Cor (lbs) †
1	7200	10	0.3937	30	1.1811	9	0.3543	0.6	0.025	1,250	546
2	7201	12	0.4724	32	1.2598	10	0.3937	0.6	0.025	1,420	633
3	7202	15	0.5906	35	1.3780	11	0.4331	0.6	0.025	1,607	742
4	7203	17	0.6693	40	1.5748	12	0.4724	0.6	0.025	1,967	982
5	7204	20	0.7874	47	1.8504	14	0.5512	1.0	0.040	3,058	1698
6	7205	25	0.9843	52	2.0472	15	0.5906	1.0	0.040	2,853	1594
7	7206	30	1.1811	62	2.4409	16	0.6299	1.0	0.040	4,580	2631
8	7207	35	1.3780	72	2.8346	17	0.6693	1.0	0.040	6,358	3900
9	7208	40	1.5748	80	3.1496	18	0.7087	1.0	0.040	7,605	4948
10	7209	45	1.7717	85	3.3465	19	0.7480	1.0	0.040	7,119	4620
11	7210	50	1.9685	90	3.5433	20	0.7874	1.0	0.040	8,869	6587
12	7211	55	2.1654	100	3.9370	21	0.8268	1.5	0.060	8,771	5924
13	7212	60	2.3622	110	4.3307	22	0.8661	1.5	0.060	8,696	6075
14	7213	65	2.5591	120	4.7244	23	0.9055	1.5	0.060	11,555	8122
15	7214	70	2.7559	125	4.9213	24	0.9449	1.5	0.060	12,559	8931
16	7215	75	2.9528	130	5.1181	25	0.9843	1.5	0.060	13,321	9956
17	7216	80	3.1496	140	5.5118	26	1.0236	2.0	0.080	14,651	10737
18	7217	85	3.3465	150	5.9055	28	1.1024	2.0	0.080	16,749	12878
19	7218	90	3.5433	160	6.2992	30	1.1811	2.0	0.080	19,274	14977
20	7219	95	3.7402	170	6.6929	32	1.2598	2.0	0.080	21,953	17228
21	7220	100	3.9370	180	7.0866	34	1.3386	2.0	0.080	24,775	19618
	Part Number	Bore d<br>(mm.)	Bore d<br>(in.)	Outside<br>Diameter<br>D (mm)	Outside<br>Diameter<br>D (in.)	Width C<br>(mm)	Width C<br>(in.)	Corner<br>Radius<br>R* (mm)	Corner<br>Radius<br>R* (in.)	Basic<br>Dynamic<br>Radial<br>Load<br>Rating<br>Cr (lbs) †	Basic<br>Static<br>Radial<br>Load<br>Rating<br>Cor (lbs) †

† Refer to the Technical Info section for Bearing Life Calculations.

* Maximum shaft or housing fillet which bearing corner will clear.

Notes:

Available with shields or seals.
Contact Schatz Bearing Corporation’s Engineering Department for further technical information.
Check with Schatz Bearing Corporation’s Sales Department for price and availability.